Earthquake Resistance Structural Steel Studs , Standard Drywall Studs And Track

Standard Drywall Stud And Track / Light Gauge Steel Structure / Steel Main Keel Stud

Product description:

Galvanized steel studs is a new type of building material
Galvanized steel studs adopts high-quality hot-dip galvanized strip as raw material, and is widely used in non-load-bearing wall and roof construction decoration such as paper plasterboard and decorative plasterboard.
Continuous hot-dip galvanizing process, deep zinc layer and corrosion resistance.
The zinc coating of hot-dip galvanized strip steel is 60-140g / m2.
Because some galvanized steel studs are larger, they are usually packed in 40-foot containers, and each 40-foot container can hold 120 square feet of light-steel villas.
Products use sophisticated production equipment, advanced production technology, scientific detection methods.
Adopt high-grade galvanized and baking varnished plate, which has better anti-corrosion and fire resistance.
High-quality steel: smooth surface, not easy to deform.
New environmentally friendly products: galvanized steel, no radiation, no harmful substances, no pollution to the environment.

Structural steel studs feature

• Earthquake resistance: The roofs of low-rise villas are mostly sloped roofs. Therefore, the roof structure is basically a triangular roof frame system made of cold-formed steel members. The sturdy "slab structure system", this structure system has stronger earthquake resistance and ability to resist horizontal loads, and is suitable for areas with an earthquake intensity of 8 degrees or more.
• Wind resistance: Light steel structure building has light weight, high strength, good overall rigidity and strong deformation ability. The weight of the building is only one-fifth that of the brick-concrete structure, which can resist hurricanes of 70 meters per second, so that life and property can be effectively protected.
• Durability: The light steel structure residential structure is all composed of cold-formed thin-walled steel member system. The steel frame is made of super anti-corrosion and high-strength cold-rolled galvanized sheet, which effectively avoids the influence of rust on the steel plate during construction and use. Service life. Structure life is up to 100 years.
• Thermal insulation: Glass fiber cotton is used as the thermal insulation material, which has good thermal insulation effect. The outer wall insulation board can effectively avoid the "cold bridge" phenomenon of the wall and achieve better insulation effect. The thermal resistance of R15 insulation cotton with a thickness of about 100mm can be equivalent to a 1m thick brick wall.
• Sound insulation: The sound insulation effect is an important index for evaluating residential buildings. The windows installed in the light steel system are all hollow glass, which has a good sound insulation effect. The sound insulation is more than 40 decibels. The wall composed of light steel keel and insulation material gypsum board is soundproof. The effect can be as high as 60 dB.
• Health: dry construction, reduce pollution caused by waste to the environment, housing steel structure materials can be recycled 100%, other supporting materials can also be mostly recycled, in line with current environmental awareness; all materials are green building materials to meet the requirements of the ecological environment, good for health.
• Comfort: The light steel wall uses an efficient energy-saving system with a breathing function to adjust the indoor humidity and dryness; the roof has a ventilation function that can form a flowing air space above the house to ensure ventilation and heat dissipation requirements within the roof.
• Environmental protection: The material can be 100% recycled, truly green and pollution-free.
• Energy-saving: All adopt high-efficiency energy-saving walls, which have good thermal insulation, heat insulation and sound insulation effects, and can reach the energy saving standard of 50%.

Features:

made of corrosion resistant high-quality continuous hot-dip galvanized steel strip, the double-sided galvanization
it easier to fasten screw.
Rib reinforcement design for flanges increases the rigidity of frame and reduces deformation.
Produced by advanced technology in imported continuous production line ensuring high dimensional accuracy
Geometrical size designed according to Chinese architectural characteristics and standards.
Simple processing of frame can form ceiling designs with different effects, such as stepped ceiling, lighting box, etc.

Applicable scope:

Possible to select plasterboards of different performances according to different requirements. Fix plasterboards on ceiling profiles with self-tapping screws to meet different performance demands.
It can be used with universal bracket and applicable to wall lining system.

Specifications

Picture show

FAQ

Q. Can sizes of different lengths be produced?
A. Yes, the normal is 3 meters.

Q:Are you a manufacturer?
A:Yes , we are a manufacturer, not agent. We have own factory, which is located in HEBEI,CHINA.

Q: Is customized available ?
A: Yes, according to your detailed drawings you provide.

Q. What is the zinc content on the surface of the product?
A. In the case of no special customization, the general is 40-50 grams.

Q: Can you supply sample?
A:Yes,we can supply you free small samples,but air cost will be paid by customers.

Q:How about the quality of products in your company?
A:We have high and best quality products and our products get some good feedbacks from clients all over the world. Once you got our products with some questions under guarantee, we will provide helps at first place.

structural stud framing

structural metal studs

Earthquake Resistance Structural Steel Studs , Standard Drywall Studs And Track Images